Showing posts with label Handy Tools. Show all posts
Showing posts with label Handy Tools. Show all posts

Tuesday, 11 August 2009

BAIE URE SE KYK HIER

sagenealogie.com of sagenealogy.com.
(Klik op een van bostaande.)

Neem kennis van voorgaande. Dis ‘n hulpmiddel soos min vir Suid-Afrikaanse genealoë.

Dennis Pretorius (regs), die skepper hiervan skryf op die tuisblad:

“SAGenealogie is 'n wêreldwye genealogiese gespreksgroep op die Internet met Afrikaans as voertaal. Dit bestaan tans uit amper 800 vriendelike en hulpvaardige genealoë van rondom die aardbol wat wissel van beginners tot gesoute en selfs professionele navorsers in sy geledere”.

Dié webtuiste bevat ‘n magdom inligting. Kyk net:

  • ‘n Foto-databank met honderde interessante en insiggewende foto’s – van ABO-foto’s en kerke in ‘n rits dorpe tot begrafnisbriewe en ou vervoermiddels.
  • Dit is ook die vertrekpunt vir nuwe lede van SA Genealogie-gespreksgroep waar lede (let wel daar is amper 800) mekaar onder meer help om hul voorsate op te spoor.
  • Dit bevat ‘n reeks beproefde genealogiese skakels.
  • Verskeie lede se webwerwe is te sien.
Diegene wat nog nie met dié webwerf kennis gemaak het nie, het ‘n hele paar ure se ontginningswerk wat wag.

Onder: Een van die ongewone foto's op SAGenealogie se foto-databasis. Zeederberg se Sebra-span op Pitersburg gereed om die pad na Leysdorp (1881). Foto: H Exton-versameling.


Piet Roets het vir Doel Zeederberg die idee gegee om Zebras mak te maak en te gebruik weens skaarste van perde en muile. In 1881 het Jacob Erasmus zebras gevang en hulle op sy plaas in Leydsdorp geteel. Roets, wat naby Haenertsburg geboer het, en Izak van der Merwe van Pietersburgdistrik het sy voorbeeld gevolg. Hulle het daarin geslaag om kwaggas mak te maak, te teel en selfs 'n ploeg te laat trek. Roets het van sy mak kwaggas aan Doel Zeederberg aangebied en tot sy verbasing het Doel sy aanbod aanvaar en 20 diere van Roets gekoop vir £200. Hulle spoed oor kort afstande was vinniger as die van 'n perd of muil, maar hulle het stamina kortgekom en 'n goeie perd kon hulle binne tien minute flou hardloop.

Bron: Neem uit die Verlede (Nasionale Parkeraad van Suid-Afrik). Dr U de V Pienaar, "Transportpaaie", p. 273

Sunday, 17 August 2008

Google Earth: An Excellent Tool in Genealogy Research

Google Earth can be an amazing online tool to assist in our genealogy research.

Today, with high gas prices and rising air fares, it is difficult for many genealogy enthusiasts to make trips to the homes of their ancestors.

But now, we can take a virtual trip, and gain a new perspective into the location and landscape of far away places, which may hold keys to our history.


My first experience using Google Earth to assist in family history research involved searching for my grandfather's farm in Michigan. I live in Arizona, and have never been to Michigan. But, I did have an aerial photo of the farm, along with an address. My paternal grandfather had passed away some forty years ago, and I had never met the man or had the opportunity to visit his farm.

After downloading the free version of Google Earth on my computer, I typed in the address to the farm in the upper left hand corner search box. Suddenly the earth pictured on the site began to whirl, and I found myself being whisked to Michigan. It didn't take long to identify the farm, even though it had been over four decades since the picture was taken. Many of the buildings remained, and matched the photo I had of the farm. Amazingly, the online image was very clear.

It was pretty fascinating, and soon I began zooming to Norway, Sweden, and even my old neighborhood in Covina California. I noticed some images were remarkably clear, showing cars and in some instances, people. Some searches did not bring terrific visual results, and were only clear from a distance.

Using Google Earth brings into perspective the geography of our family history. Even though the satellite images are fairly recent, they allow us to get the general lay of the land, along with giving us a better idea where the area is located. Some searches even provide snapshots of the area, so we can see more elevation visuals, rather than just the roof tops. -- Bobby Holmes, Associated Content.
  • The picture on top shows the Krugersdorp-Roodepoort area. The next picture is a zoom into supposedly a smallholding in the same area.

Wednesday, 25 June 2008

DIE NOODSAAK EN NUT VAN DIE GESPREKSGROEP, SAGENEALOGIE


Dit verbasend hoeveel mense in die genealogie belangstel, maar nie weet dat daar hulp is nie. Gevolglik sterf hul belangstelling dikwels asook die bydrae wat hulle tot die genealogie kon gemaak het.

‘n Antwoord hierop, ten dele, is om by SAGENEALOGIE (kortom: SAGEN), ‘n Afrikaanse Genealogiese Geselsgroep, aan te sluit. Hier is nie minder nie as 846 lede (tans) wat mekaar daagliks help om onder meer hul voorouers en ander familie op te spoor. Daar is ook dikwels interessante en stimulerende debatte oor aspekte in die genealogie.
Lidmaatskap is gratis.


Onder die lede is manne en vroue wat die genealogie al jare lank beoefen, maar ook nuwelinge.

Neem kennis: dié groep sal nie jou stamregister saamstel nie. Jou werk bly jou werk, maar jy sal baie waarskynlik hulp kry.
Moenie verwar word met  
SAGenealogie se webwerf en  
SAGenealogie se gespreksgroep (ook genoem poslys) nie.
  • Die webwerf verduidelik waaroor alles gaan:  die agtergrond, die doel, die taalbeleid en hoe om aan te sluit en
  • Die geselsgroep is waar boodskappe (vrae en antwoorde) geplaas word – ‘n poslys.
Dennis Pretorius (regs), een van die land se voorste genealoë, is die skepper van hierdie nuttige gebruiksmiddel. Hy word deur ‘n knap bestuurspan bygestaan.
Op die webwerf word die doel soos volg uiteengesit:
  • Om die geleentheid te bied om ons genealogiese doelwitte te bereik;
  • Om dit in 'n atmosfeer te doen waar ons vriende kan maak en bly en
  • Om ons kennis met mekaar te deel om sodoende meer mense bloot te stel aan ons passie.
Alvorens u by SAGENEALOGIE aansluit, gaan lees eers die inhoud van die webwerf. Klik HIER. Daar is ook verskeie handige skakels na ander webwerwe.
Daar is duidelike riglyne oor die moets en moenies van die gespreksgroep. Advertensies, sinnelose boodkappe, persoonlike aanvalle en politieke gesprekke is verbode. As ‘n lid oortree, sal hy/sy deur die lyseinaars aangespreek word en lidmaatskap van die poslys mag selfs beëindig word.
Om by SAGENEALOGIE aan te sluit, kan een van twee weë gevolg word:
SAGENEALOGIE was in Desember vanjaar agt jaar oud. In dié tydperk was daar al duisende navrae en antwoorde. Die tabel hieronder toon ‘n geskiedenis van die hoeveelheid boodskappe wat al daar verskyn het. Dit vertel ‘n verhaal van welwillendheid en hulpvaardigheid.

Alle antwoorde op navrae word nie noodwendig op die gespreksgroep (poslys) geplaas nie. Lede kry dikwels antwoorde wat na hul private epos-adresse gestuur word. Die hulp wat uit SAGENEALOGIE voortvloei, is dus veel meer as wat die tabel weerspieël.

Al hierdie boodskappe (na raming 75 000)
is nie verlore vir diegene wat nou eers aansluit nie.
Hulle kan almal, volgens u keuse, deurgesoek word
 
Maak só:
  • Gaan na die Poslys (Messages).
  • Heelbo of heelonder is ‘n blokkie “Search”. (Sien die diagram hieronder.)
  • Gestel u wil al die boodskappe sien wat al oor die familienaam (van), Ferreira, geplaas is.
  • Tik "Ferreira" in (sonder die aanhalingstekens). Dit sal 975 (tans) boodskappe wys.
  • Tik "Jan Christoffel Ferreira", byvoorbeeld, in en die resultaat word na 80 (tans) boodskappe verminder.
  • Tik "Jan Christoffel Ferreira Bloedrivier", byvoorbeeld, in en die resultaat word na 8 (tans) verminder.
  • Met die “Newer”en “Older” (regs van "Search") kan u tussen hulle rondsoek.
 

'n Magdom inligting wag om gevind te word.
Dis voorwaar een van Suid-Afrika se voorste, vriendelikste en nuttigste genealogiese gebruiksmiddels. Bowe alles: hier maak ‘n mens vriende – oor die hele wêreld.
WENK: Nadat u intekening goedgekeur is, het u die keuse of u elke dag nuwe boodskappe individueel of in groepe (digest) wil kry. Om u keuse te maak, doen die volgende:

  • Gaan na die Poslys (Messages);
  • Klik op “Edit membership”. Dit is klein geskryf. ‘n Mens sien dit skaars raak. Die rooi pyltjie hieronder dui dit aan; 
 
  • Kies tussen “Individual Mail” of “Daily Digest” onder “Step 2”.
  • “Step 1” en “Step 3” het ook belangrike keuses om te maak.

Saturday, 29 December 2007

DON'T DO IT!

  • Op 19 Januarie 2006 is die volgende vraag op Rootsweb gevra: Is dit wenslik om familiedokumente, soos geboortesertifikate, begrafnisbriewe, koerantknipsels, ens. te lamineer om dit teen die tyd se verinnewering te beskerm. Sal dokumente in hul oorspronklike staat meer waarde behou?
  • Anne Lehmkuhl answered as follows: Never laminate original family documents -- the glues in laminate can eventually destroy the documents. Rather make a photocopy of the original and laminate that if you want a laminated copy.
  • Karin Serfontein replied: I would suggest that you contact a scrapbook shop and buy some acid free paper and pockets to protect you valuable documents and photos. Please don't laminate them.

Saturday, 27 October 2007

ORDERING DOCUMENTS FROM THE CAPE ARCHIVE

Steps to be taken to obtain documents from the Cape Town Archive

Send an order for
a maximum of 50 documents per month
by either

E-MAIL TO: readroom@pgwc.gov.za

OR


POST TO: Western Cape Archive, Private Bag X0-25, Cape Town 8000

OR

FAX TO: +21-465-8100.

  • The archive will reply with a document to be signed by the researcher.
  • Return the document either by fax to +21-465-2960 , e-mail or snail-mail to above addresses.
  • The archive will respond with a quotation and bank account details.
  • Either deposit the amount against their reference number or mail the cheque to above address.
  • Wait.
No additional fee is charged for mail -- only 80 cents per page copied.

No website is available with instructions.

I e-mailed my first order on 16 September 2007 and am now at waiting.

  • The Pretoria Archive does not provide the same service for the ordering of copies - it might follow soon. The contact details for all the archive repositories can be found on the NAAIRS website www.national.archives.gov.za
From Dennis Pretorius, Krugersdorp, South Africa, Executive Member of GSSA, Genealogical Researcher, Owner of SAGenealogy E-mail List, via Rootsweb.

Monday, 22 October 2007

LET YOUR PC TIDY UP ITSELF

More than 42% of PC users do not
DEFRAG

their computers with 16% of all participants not even knowing what it meant.
For genealogists, whose computer is one of their most important tools,
this simple process is vital.


Defragmentation is necessary if you want your computer to perform at its best.

Fragmentation occurs due to the normal computer activity. Each time you save, delete, or modify a file you contribute to the fragmentation of your system. This results in slower processing time until the computer is “cleaned up” through defragmentation. -- www.gold-directory.com

The University of Information Services writes as follows about defragging:

Why bother?

If your desk is organized, it's easy to find your papers. But, when you're busy working on a project, you may not take the time to put things where they belong; you may just plunk things down on your desk and leave them where you dropped them. As your desk gets more cluttered, it gets harder to find things until, eventually, you need to stop and clean up.

When your computer is using files, it will plunk them down, here and there, on the hard drive. If a file is too big to fit in a particular space, your computer will break up (fragment) the file and put the pieces in several different places. As the drive gets more and more cluttered, it takes your computer longer to find things, and the system runs slower and slower. Defragmenting your hard drive will reorganize all these files and pieces of files, making it easier for your computer to find them quickly.

The program tells me I don't need to defragment my hard disk

On older versions of Windows, the disk defragmenter program may tell you that this disk is only (such-n-such) % fragmented, and that you do not need to run disk defragmenter at this time. Today, hard drives are much bigger than they were when Windows 95 first came out. You're concerned with the amount of fragmentation, not how this figure compares to the total size of your drive. Even a few percent of 6 gigabytes can be enough fragmentation to slow down your system.

Schedule enough time for the job

You won't be able to use your computer while the disk defragmenter program is running and the tool may take quite a while if you've never used it before. Consider starting the program just before you go off to a meeting, or class, or lunch. We don't recommend leaving your computer on overnight.

Defragmenting your hard drive can be a bit like going to the dentist; it's tedious and time-consuming, but the longer you put it off, the worse it is. The more fragmented your drive, the longer the program takes to fix it. If you run disk defragmenter frequently, it shouldn't take long each time.

Why can't I use my computer while I'm defragmenting it?

For the defragmentation tool to run properly, you must turn off all the programs that are running on your computer, especially anti-virus software and disk utility programs. These applications constantly change the information on your hard drive; each time the information changes, the defragmentation program starts over again.

How often should I defragment my hard disk?

We recommend that you run disk defragmenter every couple of weeks, particularly if you use the Internet often. You should make it part a regular maintenance schedule along with running scan disk and deleting unnecessary files.

Sandy Berger writes in AARP:

How To Defrag

Want to keep your computer running smoothly? Would you like to possibly speed it up at the same time? There is a simple little utility program built into Windows that will help you do just that. It is called Disk Defragmenter.

Don't be put off by the name. It sounds a bit complicated, but defragmenting your hard disk is easy. You just need a little knowledge about how a computer works to understand what disk defragmentation is and how it works.

Deafrag Explained

When you add a file or a new program to a brand new computer, the hard disk is relatively empty so new data is written to the hard disk in one contiguous block. When you need to use that information, the computer can quickly access it because it is all in one place.

As you use your computer adding files and programs, the hard disk begins to fill up. Deleting files or removing programs creates small empty areas among the other data that the computer will reuse. After awhile, the computer is no longer saving information in large blocks. Instead, it stores information in the many little empty nooks and crannies of your hard disk. The result is that one program or file is broken up, or fragmented, into little pieces and stored in many different areas of the hard disk. The computer ingeniously keeps track of the addresses of each piece of data and puts it all together when it is needed. Yet, obviously, the more broken up the information is, the longer it takes to access the data and the slower the computer becomes.

Finding the Defrag Utility

The solution is a simple one. Your Windows computer comes with a program that will defragment your hard disk. This process reunites all the data into large blocks and gathers all the free space on the hard disk into one block making data retrieval faster and easier for the computer.

Most of you will be able to find the disk defrag program by:

  • Clicking on the Start button,
  • Then choosing (All) Programs,
  • Then Accessories,
  • Then System Tools, and
  • Finally clicking on the Disk Defragmenter.
If you have any trouble finding it, simply click on Start, then Help. Click on the Search tab and type in the word "defragment." The computer will give you a link to the defrag program.

Depending on your computer and your hard disk, defragmenting the hard disk can take a bit of time. After you defrag, you will see no difference in your computer, except for a little faster speed if the disk was very fragmented. Yet, getting into the routine of defragging every now and then is a good habit to form since it keeps your computer running smoothly. Some programs, like video editing software, will crash if the disk is too fragmented.

Trouble Shooting the Defrag

Before you start the defrag process you will want to turn off any programs that you are running, including those running in the background like firewalls and anti-virus programs. If you try to defrag when these programs are running, the defrag process will constantly be stopped.

Friday, 1 June 2007

GOOGLE ALERTS; GOOGLE IMAGES; WIKIPEDIA AND GEDCOM

GOOGLE ALERTS

Google Alerts is a very handy, easy- to- use, tool if you want the latest articles/news/developments about a subject on the internet and be automatically notified about them regularly via e-mail.

• Go to www.google.com.
• Under the “e” of “Google” you will notice the word “more”. If you click on that, it will take you to a another screen.
• Under “Search” the first choice is “Alerts”.
• Go there.

An alternative method is to go to www.google.com and search for Google Alerts. This will get you to: http://www.google.com/alerts. Go there.

Here you can key in a topic of your choice, such as: Genealogy; Ancestry; Family Search; Family Tree, Rugby, Cricket, Bridge, Photography, Cooking, UFO's, Gardening, Chess -- whatever you wish.

Complete the rest and await an e-mail to confirm that it was you who requested the alert. Hereafter you will receive e-mails of the latest on the web concerning that subject.

GOOGLE IMAGES

People, genealogists included, are often looking for a photograph or an image to illustrate something.
• Go to www.google.com.
• Under the “G” of “Google” you will notice the word Images. Click on it.
• Enter the name of the person whose photograph you require, a building name or whatever you need. If it is on the web, it will be displayed.

Recently, a friend was looking for a picture or sketch of a hartbeeshuisie. It was found within seconds.

To make your search more accurate, key your request between quotation marks. Try your own name!

WIKIPEDIA

This is a multilingual, web-based, free content encyclopedia project. Wikipedia is written collaboratively by volunteers; its articles can be edited by anyone with access to the Internet. Wikipedia's name is a portmanteau of the words wiki (a type of collaborative website) and encyclopedia. Its primary servers are in Tampa, Florida, with additional servers in Amsterdam and Seoul.

Wikipedia's English edition was launched on January 15, 2001. The project is currently operated by the Wikimedia Foundation, a non-profit organisation created by Jimmy Wales, the co-founder of Wikipedia. Wikipedia has approximately 7.2 million articles in 251 languages ,1.7 million of which are in the English edition. You will even find Afrikaans articles. It has steadily risen in popularity since its inception and currently ranks among the top fifteen most-visited websites worldwide.

Due to its open nature, critics have questioned Wikipedia's reliability and accuracy. The site has also been criticized for its susceptibility to vandalism, uneven quality, systemic bias and inconsistencies, and for favoring consensus over credentials in its editorial process. Wikipedia's content policies and sub-projects set up by contributors seek to address these concerns. Two scholarly studies have concluded that vandalism is generally short-lived and that Wikipedia is roughly as accurate as other encyclopedias. (Source: Wikipedia)

GEDCOM AND HOW TO USE IT

One of the biggest advantages to using the Internet for genealogy research, is the ability it provides to exchange information with other researchers. One of the most common methods used for this information exchange is the GEDCOM, an acronym for GEnealogical Data COMmunication. In simple terms it is a method of formatting your family tree data into a text file which can be easily read and converted by any genealogy software program.

GEDCOM was developed by The Church of Jesus Christ of Latter-day Saints as an aid in their extensive genealogical research. A GEDCOM file is plain text containing genealogical information about individuals, and data linking these records together.

Most genealogy software supports importing from and/or exporting to GEDCOM format.The GEDCOM specification was originally developed in 1985 and is owned and managed by the Family History Department of the Church of Jesus Christ of Latter Day Saints.

A GEDCOM specification uses a set of TAGS to describe the information in your family file, such as INDI for individual, FAM for family, BIRT for birth and DATE for a date. Many beginners make the mistake of trying to open and read the file with a word processor. Theoretically, this can be done, but it is a very tedious task. GEDCOMS are best suited for opening with a family tree software program or a special GEDCOM. Otherwise, they basically just look like a bunch of gibberish.

Anatomy of a GEDCOM File (for the more technical)

If you have ever opened a GEDCOM file using your word processor, you have probably been faced with a seeming jumble of numbers, abbreviations, and bits and pieces of data. There are no blank lines and no indentations in a GEDCOM file. That's because it is a specification for exchanging information from one computer to another, and was never really intended to be read as a text file.

GEDCOMS basically take your family information and put it in an outline format. Records in a GEDCOM file are arranged in groups of lines that hold information about one individual (INDI) or one family (FAM) and each line in an individual record has a level number. The first line of every record is numbered zero (0) to show that it is the beginning of a new record. Within that record, different level numbers are subdivisions of the next level above it. For example, the birth of an individual may be given level number one (1) and further information about the birth (date, place, etc.) would be given level two (2).

After the level number, you will see a descriptive tag, which refers to the type of data contained in that line. Most tags are obvious: BIRT for birth and PLAC for place, but some are a little more obscure, such as BARM for Bar Mitzvah.

A simple example of GEDCOM records (Explanations are in blue):

0 @I2@ INDI <- The level 0 means this is a new record. The INDI tag means the record is for an individual.
1 NAME Charles Phillip /Ingalls/ <-name of individual
1 SEX M <- level 1 info denotes data about the individual in level 0, Charles Ingalls
1 BIRT
2 DATE 10 JAN 1836 <- this is level 2, because it refers to the birth in level 1 above
2 PLAC Cuba, Allegheny, NY
1 DEAT
2 DATE 08 JUN 1902
2 PLAC De Smet, Kingsbury, Dakota Territory
1 FAMC @F2@
1 FAMS @F3@
0 @I3@ INDI <-A new record (level 0) for a new individual
1 NAME Caroline Lake /Quiner/
1 SEX F
1 BIRT
2 DATE 12 DEC 1839
2 PLAC Milwaukee Co., WI
1 DEAT
2 DATE 20 APR 1923
2 PLAC De Smet, Kingsbury, Dakota Territory
1 FAMC @F21@ <-FAMC indicates the FAM record where this person appears as a Child
1 FAMS @F3@
<-FAMS indicates the FAM record where this person appears as a Spouse

As you can see, a GEDCOM is basically a connected database of records with pointers which keep all of the relationships straight. While you should now be able to decipher a GEDCOM with a text editor, you will still find it much easier to read with the appropriate software. (Source: Wikipedia)

Thursday, 5 April 2007

FIND ANY STREET ADDRESS

CLICK HERE FOR AN EXCELLENT SEARCH MAP TO ANY STREET ADDRESS IN SOUTH AFRICA

Read carefully. It has many options. Once you understand it, you won't go without it.

Sunday, 1 April 2007

INTERNATIONAL TIME CLOCK



  • Move the cursor to see the time in other parts of the world.

Related Posts Plugin for WordPress, Blogger...